Micro Condenser 48v Rode NT1KIT - Màng Thu Lớn, Hướng Thu Cardioid, Có Shockmount Kèm Màng Lọc Rode SM6 - Hàng Chính Hãng

Full Description The detailed midrange response, coupled with the silky smooth high frequencies and the warm, round bass reproduction make the NT1 an absolute standout in its class. The transducer is suspended inside the microphone using an SM6 shockmount which minimises external vibrations at the capsule level. The high-grade electronics have been designed to provide the lowest noise level possible, the Rode NT1 measures only 4.5dBa of self-noise. Completely redesigning the NT1-A from the ground up, the only aspect that Rode have kept is the metal grille. Corrosion-resistant and covered in a military-grade, scratch-resistant coating, each NT1 is tested meticulously to give you the best experience possible. Features / Specifications Includes SM6 shockmount and XLR lead Large capsule with gold-plated membrane Cardioid polar pattern Ultra-low noise transformerless circuitry State-of-the-art surface mount electronics Heavy-duty matte black finish Acoustic Principle: Presure Gradient Active electronics: JFET impedance converter with bipolar output buffer Directional Pattern: Cardioid Frequency Range: 20 Hz - 20 kHz Output Impedance: 100 Ohm Equivalent Noise: 4.5 dBA SPL (as per IEC651) Maximum Output: +8 dBu (1kHz, 1 THD into 1K ohm load) Sensitivity: -29 dB re 1V/Pa (35 mV @ 94dB SPL) +/- 2dB @ 1kHz Dynamic Range: 128dB SPL Maximum SPL: 132 dB SPL Signal/Noise: 90 dBa SPL (as per IEC651) Power Requirements: 24V phantom power Output connection: 3 Pin XLR, Balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground) Weight: 395g Includes: Shockmount, Pop Shield, XLR cable Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....