8X Transparent Water Flow Sensor Flowmeter Hall Flow Sensor Water control

Water flow mainly consists of plastic valve body, rotor assembly and Hall Current is installed inlet end for detecting water flow. When water through rotor assembly, Magnetic rotor will rotate and Speed will change as change. Hall Current sensor output corresponding Signal and controller, then the controller will control . Can use for Water heaters, credit card machines, water vending machine, flow measurement device. Features: weight, , install. Inlaid with stainless steel impeller shaft, durable wearable. Seal with the upper and lower force structure never leaks. Precautions: Non-violent shock, and chemical erosion. Non-throwing or hitting. Mounted vertically, should not exceed 5 degrees inclination. Temperature of Medium should not exceed 120 ℃ Cord Connection: Red: Positive(+) Yellow: Signal output. Black: Negative(-) Specification: The lowest rated working voltage: DC4.5 5V-24V. Maximum operating current: 15 mA (V). Working voltage range: ~18 v. Load capacity: ≤ 10 mA (V). Work temperature: ≤ 80 ℃ Work humidity range: 35%~90%RH () Allowing pressure: pressure 1.75Mpa Storage temperature: -25~+80 Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....