3/4" External Threads 1-60L/ Flow Sensor Flowmeter Water Control Sensor

Water flow sensor is mainly consists of plastic valve body, rotor assembly and Hall Current is installed in the hot water inlet end for detecting water flow. When water through the flow rotor assembly, Magnetic rotor will rotate and Speed will change as the flow change. Hall Current sensor output corresponding pulse Signal and feedback to controller, then the controller will control the flow. Can use for Water heaters, credit card machines, water vending machine, flow measurement device. Features: Lght weight, small size, easy to install. Inlaid with stainless steel impeller shaft, durable wearable. Seal with the upper and lower force structure never leaks. Precautions: Non-violent shock, and chemical erosion. Non-throwing or hitting. Mounted vertically, should not exceed 5 degrees inclination. Temperature of Medium should not exceed 120 ℃ Cord Connection: Red: Positive(+) Yellow: Signal output. Black: Negative(-) Specification: The lowest rated working voltage: DC4.5 5V-24V. Maximum operating current: 15 mA (DC 5V). Working voltage range: DC 5~18 v. Load capacity: ≤ 10 mA (DC 5V). Work temperature: ≤ 80 ℃ Work humidity range: 35%~90%RH (no frost) Allowing pressure: pressure 1.75Mpa Storage temperature: -25~+80 ° c Save humidity: 25%～95%RH Flow Range :1-60L / min External threads: 3/4\" Size (L x W x H): Approx. 6.2 x 3.6 x 3.5cm / 2.44 x 1.38 x 1.38 inch Output interface diameter: Approx. outer 26mm, inner 12mm, 14mm Package Includes: 1 x 1-60L / min Water flow Sensor Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....